ConnecT WF1


ConnecT WF1 WiFi Extender

SKU: N/A Category:


The Winegard ConnecT WF1 and 4G1 turn ‘WiFi Dead Zones’ into entertainment zones with a secure connection at the fastest speed available. Keep mobile devices, media players, and computers connected while you travel. Plus, the 4G1 links to nationwide 4G LTE coverage for reliable, uninterrupted coverage nearly everywhere.

MIMO technology gives you improved range of transmission in places with a large concentration of connected devices such as RV parks, rallies, and sporting events.

ConnecT WF1



  • WF-3000, ODU (white) IDU (black)
  • WF-3035, ODU (black) IDU (black)

Wireless Standard

  • 802.11a/b/g/n/ac

Frequency Band

  • 2.4GHz, 5GHz Simultaneous (5GHz indoor unit only)

Wireless Speed

  • 2.4GHz: 450Mbps (Rx), 450Mbps (Tx)
  • 5GHz: 1300Mbps (Rx), 1300Mbps (Tx)


  • Outdoor: (3) 2.4GHz amplifiers
  • Indoor: (3) 2.4GHz amplifiers, (3) 5GHz amplifiers

Wireless Security

  • WEP, WPA, WPA2, WPA mixed


  • Outdoor: (3) Detachable high gain 5dBi antennas
  • Indoor: (3) Internal 2.4GHz 4dBi antennas
    (3) Internal 5GHz 6dBi antennas

  • (1) RJ45 10/100/1000m Lan Port (IDU only)
  • (1) RJ45 PoE (ODU & IDU)
  • (2) USB 2.0 Ports

Power Rating

  • Switching, AC Input 100-240v, 1.5A

Setup Requirements

  • Wireless 802.11a/b/g/n 2.4GHz network computer, tablet, or smartphone with a web browser

In The Box

  • Long range Outdoor Unit (ODU)
  • AC1750 Indoor Unit (IDU)
  • (3) Outdoor 2.4ghz antennas
  • Power adapter
  • Indoor Unit stand
  • (3) Roof top mounting feet with nuts
  • Outdoor unit cable entry cover w/screw
  • Cable entry plate
  • (25′) Ethernet cable
  • (6) Mounting screws
  • Quick setup guide
Warranty & Support

  • Warranty: 2 Years Parts, 1 Year Labor
  • Complimentary Telephone and Email Support
  • Online Technical Manuals and Instructions
  • Large Dealer Support Network


Am I able to paint the Winegard ConnecT?

Do not paint any portion of the Winegard ConnecT. Painting the system could damage the system and will void the warranty.

Why doesn’t my system have a “Scan for WiFi” button?

One of two things is happening. Either you have logged into the system before the outdoor antenna has fully powered up. Please wait four to five minutes for the system to fully boot before logging in. – OR – The Ethernet cable for the outdoor antenna is plugged into the Ethernet port on the indoor unit. Plug it into the port labeled “POE”.

The system says that it is connected, why won’t web pages load?

Some WiFi sources do not require a password to connect but do require something before they will let you use their network. In these cases, they will often have a “SPLASH” page that requires you to either agree to their rules or enter a password before they will allow you to use their network. These pages will not always load on the web browser that you select but instead open on your device’s default browser. Sometimes browsing to a webpage will also bring up this splash page.

The system keeps making me log in every time I try to change screens…?

Check to see if you have a second window open on the Winegard ConnecT status screen. Close this window and the problem should go away.

What if I forget my password?

If you have not changed your default password, it will be listed on the back of the indoor unit. If you have changed this password, you can reset the unit using the RESET button on the bottom of your indoor unit. Press this button and your system will return to the factory settings. Once reset, the default password will unlock your system.

I changed my password and nothing happened.

The Winegard ConnecT will reject any password that is not long enough. Try entering a password of at least eight characters. This will improve the security of your devices.

What do I do if does not bring up the login screen?

One of several things has happened. The first thing to check is the WiFi signal that your model is connected to, if this is not the Winegard ConnecT SSID, this address isn’t valid. If you are indeed connected to the correct network, the address may have been changed. To reset this, press the reset button on the bottom of your indoor unit. This will return the unit to its factory settings.

My default SSID does not appear on my device when I search for it.

When the Winegard ConnecT first powers on or has reset for any reason, it stops broadcasting the SSID. It may take between four and five minutes from the time it regained power to start broadcasting again.

I changed my Winegard ConnecT SSID and was disconnected.

This is normal. The old SSID that you were connected to is no longer valid, simply open your device’s WiFi screen and search for the name you chose for your network. Select this and enter the password.

I am connected to a network but the speed isn’t very good.

The Winegard ConnecT can only extend the signal range for what is available. Try moving closer to the source of the signal and logging on with your device directly. If the speeds is still slow, try searching for another available network.